Uniform wood chips for biomass energy and industrial applications.
Wood chips are produced by mechanically chipping wood into uniform pieces, used as feedstock for biomass boilers, district heating plants and industrial energy applications. Supplied in big bags or in bulk by truckload for recurring commercial contracts.
Packaging options are subject to product availability and customer requirements.
Wood chips and sawdust are the raw, unprocessed feedstocks behind most other biomass fuels — the same materials that get compressed into pellets and briquettes, or burned directly in larger-scale biomass boilers. Because they haven't been densified, they take up more space per unit of energy than pellets, but they're typically the lowest-cost biomass option per tonne, which matters for large-volume industrial buyers.
KASUWOOD OÜ supplies wood chips and sawdust in bulk, by truckload, for buyers who need feedstock volume rather than a finished, packaged product — including pellet and briquette producers, biomass boiler operators, and agricultural buyers.
For bulk biomass feedstock, moisture content and particle size are what buyers specify most often. Moisture affects both the energy value and how the material behaves in processing equipment (higher moisture can clog augers and screens), while particle size needs to match your boiler's feed system or your pellet/briquette press's tolerances. Tell us your equipment requirements and we'll confirm what we can supply.
Pellet and briquette producers use wood chips and sawdust as their primary raw material feedstock, and specify particle size and moisture tightly to match their press equipment's tolerances. Biomass boiler and district heating operators burn wood chips directly for industrial and municipal-scale heat and power, generally buying by the truckload on a recurring supply contract. Agricultural businesses use sawdust and wood residues for animal bedding, valuing absorbency and consistent, clean material over calorific value. Panel and composite wood product manufacturers also use sawdust and fine residues as a raw material input in certain manufacturing processes, though requirements vary significantly by application — confirm your specification with our sales desk before ordering.
Wood chips vs. sawdust — which feedstock do you need? Wood chips are larger, coarser pieces produced by mechanically chipping whole wood, and are typically the right choice for direct combustion in biomass boilers designed for a chunkier fuel feed. Sawdust is a much finer material, generated as a by-product of sawing and milling, and is the preferred feedstock for pellet and briquette pressing, where fine, consistent particle size is essential for the compression process to work properly. Some buyers need a blend of both depending on their equipment — tell us your process and we can advise on the right material.
How to specify a bulk biomass feedstock order. Start with your equipment's tolerances: pellet and briquette presses typically need a narrow particle size range and low, consistent moisture, while boilers designed for chipped fuel can usually handle more variation. State your required moisture range, particle size, and delivery volume up front — this lets us confirm feasibility and pricing quickly rather than going back and forth. For recurring industrial supply, discuss a standing order or contract volume with our sales desk, which typically secures more consistent scheduling than one-off bulk orders.
Wood chips and sawdust are almost always a by-product of other timber operations — sawmilling, forestry thinning, wood processing — rather than material harvested specifically for fuel, which makes them one of the most resource-efficient biomass options available. As with other wood-based fuels, the sustainability of the overall supply chain depends on the source forestry and processing operations being responsibly managed.
These products are supplied in bulk by truckload rather than smaller retail quantities. Contact our sales desk with your required volume and we'll confirm feasibility and pricing.
Yes — tell us the moisture range your equipment needs and we will confirm what we can supply for a given order before you commit.
Wood chips and sawdust are common feedstocks for pellet and briquette manufacturing, provided particle size and moisture are within your press's tolerances. Share your equipment specification and we can advise.
Sawdust and wood residues are commonly used for animal bedding as well as industrial feedstock. Let us know your intended use so we can confirm the right material and format.
Wood chips are coarser and suit boilers designed for chunkier fuel; sawdust is finer and suits pellet or briquette presses that need consistent, small particle size. Tell us your equipment type and we'll confirm the right material.
Yes — for pellet producers, boiler operators and other recurring industrial buyers, we can discuss a standing order or contract volume, which generally gives more predictable scheduling than repeated one-off orders.
We aim for consistency within a delivery, but bulk biomass feedstock naturally has more batch-to-batch variation than processed products like pellets. If your process requires very tight moisture tolerances, tell us your requirement and we'll confirm what we can commit to.
Bulk biomass is typically quoted by weight (tonnes) or loose volume (cubic metres), depending on the product and destination market convention. We'll confirm the basis for your quote before you order.
Once you send your required quantity and delivery destination, our sales desk confirms availability and issues a wholesale quotation. Typical EU truck delivery runs approximately 3–5 business days after payment confirmation and loading — see our full delivery process for details.
Sawdust and wood processing residues for industrial and agricultural use.
View ProductSend your required quantity and delivery destination and our sales desk will prepare a wholesale quotation.
